Hydrobath Help

[ShesaLikeableBiBear]

This isn't really a thread for the Show Ring but I thought there would probably be a better response here from those who may have a Twin tank bath from The Barf Shop who are closed now for the long w/e.

I have sprung a leak from the rinse water tank.

On the back of the bath on the left hand side (opposite the controls) there is an overflow valve. It is shaped like an L with a rubber "O"ring. The whole piece has come out. I need to thread it back but was wondering if there was a part missing?. There is just the L and the rubber "O" ring.

Has anyone else had this problem?.

Would like to get some of the dogs bathed over the w/e. otherwise will have to wait until The Barf Shop open again on Tuesday.

Many thanks

Edited April 25, 2010 by Hesapandabear

[ShesaLikeableBiBear]

Bump :D

[ShesaLikeableBiBear]

No one

[piper]

No one

I know the part you mean but not had the problem to know the answer, sorry.

[ShesaLikeableBiBear]

Thanks anway, will photograph and send through to the Barf Shop tomorrow.

[Caesars mum]

H I have just had a look at mine and on the inside of the tank there is a piece that it threads into. not sure if this has been glued to the inside or if it would fall into the bottom of the tank if you unscrewed the overflow valve. Not sure if there is another washer inside.

turn off at the wall and have a feel around inthe tank, you may be able to find it, but will take 2 people to screw it back together if it has dropped into the bottom of the tank.

you may just need a new o-ring.

how old is your tank as o-rings do perish over time.