giraffez Posted March 26, 2010 Share Posted March 26, 2010 What is the best way to clean the clipper blades? I saw some blade wash at the shop today, was tempted to get it but wasn't sure whether i had to use it Link to comment Share on other sites More sharing options...
tlc Posted March 26, 2010 Share Posted March 26, 2010 I just take mine off the clipper and brush the hair out of the blade and then out of the clipper part where the blade goes. I get mine sharpened regularly so they have a good clean then. Link to comment Share on other sites More sharing options...
4 Paws Posted March 26, 2010 Share Posted March 26, 2010 90% Kero 10% Motor Oil Can also dip the tips of your blades in this mixture during clipping to clean and cool your blade than wipe and re-oil Link to comment Share on other sites More sharing options...
poodlefan Posted March 26, 2010 Share Posted March 26, 2010 I use a toothbrush to remove the worst of it and then blade wash. Link to comment Share on other sites More sharing options...
kirst_goldens Posted March 26, 2010 Share Posted March 26, 2010 i have used both above and both work very well, make sure most of the hair is off though - i use a toothbrosh as well Link to comment Share on other sites More sharing options...
giraffez Posted March 27, 2010 Author Share Posted March 27, 2010 I use a toothbrush to remove the worst of it and then blade wash. How do you use the blade wash? Do you just soak it in entirely? For how long. Do you have to re oil after the blade wash. Where can i get my blades resharpened in Sydney? Link to comment Share on other sites More sharing options...
giraffez Posted March 27, 2010 Author Share Posted March 27, 2010 i have used both above and both work very well, make sure most of the hair is off though - i use a toothbrosh as well I thought the blade wash is suppose to get all the hair off? Link to comment Share on other sites More sharing options...
Crisovar Posted March 27, 2010 Share Posted March 27, 2010 (edited) If there is too much hair on the blades it will just turn into a soggy mess, brush the blades off and dip whilst running. Wipe off excess then oil. Nicestman on here send him a pm, does an excellent job of sharpening and repairs. Edited March 27, 2010 by Crisovar Link to comment Share on other sites More sharing options...
Miranda Posted March 27, 2010 Share Posted March 27, 2010 I use Oster Blade Wash after each grooming session. I pour a small amount into a bowl, put each blade I have used on the clipper, turn the clipper on and then swish the blade around in the wash. You will be amazed how much hair and dirt comes off. Then I remove the blade from the clipper and dry it off on a paper towel. Next I put the blade back on the clipper, turn it on and put a couple of drops (that's all you need, a little goes a long way) of clipper oil on the blade. Finally I remove the blade and place it in an individual plastic bag (bank bags are excellent for this purpose). The next time I use the clipper I give each blade a wipe with a paper towel before I use it. Nothing blunts a blade quicker than dirt, so making sure your blades are kept clean and oiled and only clipping clean dogs is very important. I also have all my blades and scissors regularly sharpened. Link to comment Share on other sites More sharing options...
Baby Dragon Posted March 27, 2010 Share Posted March 27, 2010 (edited) Interesting thread Where's the best place to get blade wash and clipper oil? How often would you recommend a blade is sharpened if it's used on one dog about 6 - 10 times a year? Edited March 27, 2010 by Baby Dragon Link to comment Share on other sites More sharing options...
Koemi Posted March 27, 2010 Share Posted March 27, 2010 I've been told that blade wash can damage blades (and more importantly, it's expensive! :D)... I've got flu so can't remember exactly what was said tho. I use metho, then leave to air dry and oil the blades with Singer sewing oil (it's only $2-something at Woolworths). Toothbrush to remove excess hair, and I also slide the blade bit out because I'm a bit anal about it. Baby Dragon - I'd probably get them done once a year just to keep them fresh. Most places will only charge you about $5-$10 per blade, so it's not a very expensive exercise. Link to comment Share on other sites More sharing options...
4 Paws Posted March 27, 2010 Share Posted March 27, 2010 Have a look around Colin's(Nicestman's)website http://www.clipperbladesharpening.webs.com/ He does great sharpening,quick turn around(usually back in the mail the same day)and is very knowlegable I'm sure all the questions posted in this thread will be covered on his website Link to comment Share on other sites More sharing options...
Baby Dragon Posted March 28, 2010 Share Posted March 28, 2010 Thank you Link to comment Share on other sites More sharing options...
giraffez Posted March 30, 2010 Author Share Posted March 30, 2010 I've been told that blade wash can damage blades (and more importantly, it's expensive! )...Baby Dragon - I'd probably get them done once a year just to keep them fresh. Most places will only charge you about $5-$10 per blade, so it's not a very expensive exercise. really? so does that mean no blade wash. So its okay to dip the blade into the liquid and turn the clipper on? would i get electrocuted? Link to comment Share on other sites More sharing options...
Miranda Posted March 30, 2010 Share Posted March 30, 2010 I've been told that blade wash can damage blades (and more importantly, it's expensive! )... really? so does that mean no blade wash. So its okay to dip the blade into the liquid and turn the clipper on? would i get electrocuted? :p giraffez I have been using blade wash for years and all my blades are in excellent condition, my 15 blade is 25 years old and still cutting well. Why would Oster have a product on the market to clean and lubricate blades if it damages them? I don't agree that it's expensive either, I pay $14 for mine and it lasts for ages. Yes it's fine to dip the blade into the liquid and no you won't get electrocuted LOL. You just put the blade in not the body of the clipper and there are no electrical components anywhere near the blade. There are clear instructions on the container, just follow them, it's easy Link to comment Share on other sites More sharing options...
giraffez Posted March 31, 2010 Author Share Posted March 31, 2010 I've been told that blade wash can damage blades (and more importantly, it's expensive! )... really? so does that mean no blade wash. So its okay to dip the blade into the liquid and turn the clipper on? would i get electrocuted? giraffez I have been using blade wash for years and all my blades are in excellent condition, my 15 blade is 25 years old and still cutting well. Why would Oster have a product on the market to clean and lubricate blades if it damages them? I don't agree that it's expensive either, I pay $14 for mine and it lasts for ages. Yes it's fine to dip the blade into the liquid and no you won't get electrocuted LOL. You just put the blade in not the body of the clipper and there are no electrical components anywhere near the blade. There are clear instructions on the container, just follow them, it's easy Ok thanks, i'll order them online Link to comment Share on other sites More sharing options...
giraffez Posted April 1, 2010 Author Share Posted April 1, 2010 by the way, is it bad to use compressed air to blow out the hair in between the teeth after each clipping? Link to comment Share on other sites More sharing options...
Crazy Daisy Posted April 1, 2010 Share Posted April 1, 2010 by the way, is it bad to use compressed air to blow out the hair in between the teeth after each clipping? That's what I use. Link to comment Share on other sites More sharing options...
becks Posted April 3, 2010 Share Posted April 3, 2010 I just blow and use a toothbrush! Link to comment Share on other sites More sharing options...
giraffez Posted April 10, 2010 Author Share Posted April 10, 2010 How do you store your unused clipper blades? in one of those sealed locked bags or in the original plastic containers? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now