WildatHeart Posted September 12, 2009 Share Posted September 12, 2009 Ok, so I have some pvc that I can no longer use (brought wrong size for what I needed) So I'm going to convert it into Agility equipment. I am selling this cheaply, it wont even cover my expenses. If you want different to the photos just let me know and I can adjust it. everything will be nearly the same as in the pictures. If you want specific colours or non, let me know. FREE POSTAGE! Weave poles - Set of six 950 mm poles with base, with standard 550 mm spacing between the poles, 25mm pvc. For one set - $55 For two full sets, plus a connector to make them 12 or just two by six lots - $120 Dog Jumps Will have bars that knock off, so cups holding the bars up - 1060 mm wide & 950 mm tall $35 or - 1060 mm wide & 950 mm tall $45 Link to comment Share on other sites More sharing options...
Parkeyre Posted September 12, 2009 Share Posted September 12, 2009 Why are you in qld! everything would be awesome here in my SA backyard. Link to comment Share on other sites More sharing options...
WildatHeart Posted September 12, 2009 Author Share Posted September 12, 2009 Why are you in qld! everything would be awesome here in my SA backyard. Bonnie, I'm posting everything for free. As long as fastways (courier) can get to you it will be free. Link to comment Share on other sites More sharing options...
ness Posted September 12, 2009 Share Posted September 12, 2009 I could possibly be after 2 of the second sort if you can come up with a way I can convert it into a high/solid jump for obedience purposes . Link to comment Share on other sites More sharing options...
WildatHeart Posted September 12, 2009 Author Share Posted September 12, 2009 (edited) like a 'U' shaped peg that can go over the ends of all four corners? Or you dont want the bar to fall off and that to be solid? And possibly some more bars to make the jump look more 'full'. I can add extra bars for $8 ETA: Or did you want them higher as well? Edited September 12, 2009 by WildatHeart Link to comment Share on other sites More sharing options...
ness Posted September 12, 2009 Share Posted September 12, 2009 (edited) Something to make it look solid . We have tried the extra bars approach and that is what I use presently but mine are my agility jumps so I was hoping to have 2 dedicated to just obedience so I can have them at the correct height all the time rather than set to my agility height. Never mind might be too complicated . Will go back to my drawing board. Only needs to be 400 height I just don't like my present sheet approach as it flaps and my jump falls over. Edited September 12, 2009 by ness Link to comment Share on other sites More sharing options...
piper Posted September 12, 2009 Share Posted September 12, 2009 I could possibly be after 2 of the second sort if you can come up with a way I can convert it into a high/solid jump for obedience purposes . Ness I have seen it done using some canvas attached to the bar at either end - just get a pocket sewn in each end and thread bar through top and bootm. Allow the bottom to hang to the ground. It can height adjustable by rolling the excess canvas around the bottom pole. Does that make sense? Link to comment Share on other sites More sharing options...
Cosmolo Posted September 12, 2009 Share Posted September 12, 2009 (edited) I am very interested in both. Whats the difference between the jumps? sorry if its really obvious- long day! Edited September 12, 2009 by Cosmolo Link to comment Share on other sites More sharing options...
WildatHeart Posted September 12, 2009 Author Share Posted September 12, 2009 The first jumps has one bar on cups. And has a bar just off the ground for support (fixed). The second jump has two bars on cups and a bar on the ground for support (fixed). Link to comment Share on other sites More sharing options...
ness Posted September 12, 2009 Share Posted September 12, 2009 Yep Piper that is what I am doing at the moment and half the time my jump blows over . Sorry to go off topic WildatHeart. Link to comment Share on other sites More sharing options...
TerraNik Posted September 12, 2009 Share Posted September 12, 2009 I would love one of the second sort!!! Link to comment Share on other sites More sharing options...
WildatHeart Posted September 12, 2009 Author Share Posted September 12, 2009 (edited) ok, terra and spring dog are the lucky last. All pvc is now gone. Thanks eta: although, after i finish this lot i might consider making more for those that really want some. But I would have to charge postage. Edited September 12, 2009 by WildatHeart Link to comment Share on other sites More sharing options...
Tay. Posted September 12, 2009 Share Posted September 12, 2009 would love a 12 set of weavers =) Link to comment Share on other sites More sharing options...
Border Lover Posted September 15, 2009 Share Posted September 15, 2009 Hi have you got anything left? Or are you making any more?? Link to comment Share on other sites More sharing options...
fbaudry Posted September 15, 2009 Share Posted September 15, 2009 if ever you feel like making more, I'd be interested! Link to comment Share on other sites More sharing options...
WildatHeart Posted September 15, 2009 Author Share Posted September 15, 2009 i might make more but they will also cost more, just to cover the cost of the supplies and postage. I will post here again if i do Link to comment Share on other sites More sharing options...
Kempe Posted September 20, 2009 Share Posted September 20, 2009 I'm thinking of making some of these for my BC can I ask where you got the cups the bar sits on. The rest of the stuff I assume a plumbers hardware store would have Link to comment Share on other sites More sharing options...
WildatHeart Posted September 21, 2009 Author Share Posted September 21, 2009 I'm thinking of making some of these for my BC can I ask where you got the cups the bar sits on.The rest of the stuff I assume a plumbers hardware store would have Cups I have ordered from America. No where in Australia makes them. Also, you can only get plumbers T's so cant get crosses, 3 way or 4 way joiners either. I thought about cutting a T in half but they're tapered so didnt work. Link to comment Share on other sites More sharing options...
ness Posted September 21, 2009 Share Posted September 21, 2009 All my old jump cups were T's cut in half and they worked fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now